Christie CP2420-Xe, Инструкция по установке и настройке

Страница: 23 / 50

Installing the primary lens
The lens seals the projection head, preventing contaminants from entering the main electronics area.
• Do not operate the product without a lens installed.
• Always use a lens plug when installing or moving the product. This prevents contaminants from
entering the product.
• Keep fingers and other body parts away from the moving parts in the product. Tie back long
hair, and remove jewelry and loose clothing before manually adjusting the product.
1. Verify the rear safety strap or rear hold down bracket is installed.
2. Rotate the lens clamp to the open position.
3. With the Up label facing up, insert the lens straight into the lens mount opening all the way
back, without turning.
4. Move the lens clamp to the down position to lock the lens assembly.
Installing and setting up
CP2420-Xe and CP4420-Xe Installation and Setup Guide 23
020-103555-01 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.