3. In the left pane, expand the macro list.
4. Tap a macro.
5. Tap Save.
Deleting a macro
Delete macros when they are no longer required.
1. In the left navigation menu, tap Automation > Macro Editor.
2. From the list in the top right pane, select a macro.
3. Tap Delete.
4. To confirm the deletion, tap Delete.
Adding an automation device to your auditorium
Add an automation device so it can be controlled remotely and can communicate with other theater
hardware.
1. In the left navigation menu, tap Automation > My Auditorium Devices.
2. Tap + New Device.
3. In the Name field, type a name for the device.
4. In the Device Type list, select the device type.
5. In the Select Device list, select the device.
6. Tap Add.
7. Complete these fields:
•
IP Address—The IP address of the automation device.
•
Port—The port used by the automation device to communicate with the projector.
•
Username—The username used to access the automation device.
•
Password—The password used to access the automation device.
•
Keep Alive Message—The message value that is sent to the automation device to ensure
the projector is not disconnected when inactive.
•
Keep Alive Interval (ms)—The time interval (in microseconds) for sending the Keep Alive
Message to the automation device.
8. Tap Save.
Modifying automation device settings
Modify the settings of automation devices when parameters such as the user name or password
change. If the settings are not updated, the automation device might be unable to communicate with
other theater hardware or be controlled remotely.
1. In the left navigation menu, tap Automation > My Auditorium Devices.
Automation
CP2308 User Guide
79
020-102535-03 Rev. 1 (08-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Содержание CP2308
Страница 1: ...User Guide 020 102535 03 CP2308...
Страница 111: ......