Christie CP2306-RGBe, Руководство пользователя

Страница: 21 / 99

Operating the projector
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual 21
020-001835-02 Rev. 1 (05-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
3. In the left navigation menu, tap Service Setup > Preferences.
4. Tap Touch Panel.
5. To calibrate the touch panel, tap Start Calibration.
Turn the light source on to display content or view test patterns, turn the light off to extend the life of the
lasers.
6. To turn the light source on or off, in the right toolbar, tap and hold Light.
If you turn on the light source when the projector power is off, power is turned on automatically.
Open the douser to display light on the screen or close the douser to remove light from the screen.
1. In the right toolbar, tap and hold Douser.
Create channels to store customized projector settings for different inputs.
2. In the right toolbar, tap Channels.
The Channels window displays the available channels.
3. Tap a channel.
In the Channel Setup panel, a green checkmark indicates the active channel.
Add a network time protocol (NTP) server to synchronize the time on all installed projectors in the same
region.
1. In the left navigation menu, tap Service Setup > Time Setup.
2. Tap the Time Sync using NTP Server slider.
3. The color of the slider changes to green to indicate it is active.
4. Tap + New NTP Server.
5. Select a local or a public NTP server:
6. To use a local NTP server, tap Local Server and type the IP address in the IP Address field.
7. To use a public NTP server, tap Public Server and complete the Country and Server fields.
8. To test the connection, tap Test.
9. Tap Add.