Test patterns
Use the projector to assist with configuration of the projector and to diagnose any issues that may
occur.
Adding or removing preferred test patterns
Add or remove test patterns from the Preferred Test Patterns pane.
1. On the touch panel controller (TPC), log on to the projector (on page 19) with administrator or
service permissions.
2. Tap Menu > Administrator Setup > Preferred Test Pattern Setup.
3. To add a test pattern to the Preferred Test Pattern pane, tap and drag a test pattern from the
Unselected Patterns list to User Selected pane.
4. To remove a test pattern from the Preferred Test Pattern pane, tap and drag a test pattern
from the User Selected pane to the recycle bin in the bottom right corner.
Turning a test pattern on or off
Test patterns are available to assist with the configuration of the projector and to diagnose any issues
that may occur.
1. In the touch panel controller (TPC) task bar, tap the Test Pattern icon:
2. Tap All Test Patterns.
3. To turn a test pattern on, in the Preferred Test Patterns pane, tap the test pattern.
4. To turn the test pattern off, tap Test Pattern Off.
Displaying a full screen test pattern
Some test patterns fill the screen instead of a portion of it.
1. In the touch panel controller (TPC) task bar, tap the Test Pattern icon:
2. Tap All Test Patterns.
3. To turn the test pattern on, in the Preferred Test Patterns pane, double-tap the test pattern.
4. Tap Full Screen (Ignore screen file settings).
CP2208-LP Installation and Setup Manual
32
020-102152-03 Rev. 1 (05-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.