Christie CineLife+ RGB PLF CP4450-RGB, Инструкция по установке и настройке

Страница: 40 / 61

Logging on to the projector
Log on to the projector to access projector menus.
1. Tap Login.
2. In the User list, select a user name.
3. Enter your password.
4. Tap Login.
Turning the light source on or off
Turn the light source on to display content or view test patterns, turn the light off to extend the life of
the lasers.
• To turn the light source on or off, in the right toolbar, tap and hold Light.
If you turn on the light source when the projector power is off, power is turned on
automatically.
Allow the projector to cool down for 10 minutes after turning it off.
If you turn on the laser source while the projector is cooling down, the lasers turn on.
Activating marriage
You must complete marriage to display content and to comply with the Digital Cinema Initiatives (DCI)
specification.
For more information on marriage, refer to C RGB PLF User Guide (P/N: 020-103073-XX)
You cannot complete marriage remotely.
1. In the left navigation menu, tap Service Setup > Marriage Setup.
2. Tap Start and complete the Marriage Setup wizard.
3. Tap Finish.
4. Verify that the marriage ring is installed correctly and an anti-tamper alarm does not appear
on the touch panel.
Completing the installation checklist
Complete the provided installation checklist (P/N: 020-103137-XX) and return it to Christie.
Installing and setting up
C RGB PLF Installation and Setup Guide–CP4450-RGB 40
020-103072-02 Rev. 1 (09-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.