10. Using the four screws, re-attach the knockout plate and ensure the appropriate strain relief is
in place.
11. Using the six captive screws, reinstall the rear cover of the projector.
Connecting to an uninterruptible power supply
An uninterruptible power supply (UPS) allows the cinema projector head electronics to remain
operable during a power failure.
Warning! If not avoided, the following could result in death or serious injury.
•
SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.
The following table lists the part numbers for the optional UPS power cords for each region.
Power Cord Description
Part Number
North America 125V/15A
108-382104-XX
Japan 125V/12A
108-371102-XX
China 250V/10A
108-373104-XX
UK 250V/10A
108-388100-XX
EU/Korea 250V/10A
108-390103-XX
Australia 250V/10A
108-392105-XX
South Africa 250V/10A
108-487100-XX
1. If installed, remove the projector touch panel.
2. Remove the rear cover of the projector by unscrewing the 6 captive screws.
3. Behind the MAIN input circuit breaker, disconnect the MAIN input plug from the top power
supply.
A
UPS input plug
B
MAIN input plug
Installing and setting up
C 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB
23
020-103244-04 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Содержание CineLife+ 4K-RGB
Страница 1: ...Installation and Setup Guide 020 103244 04 CineLife 4K RGB CP4415 RGB CP4420 RGB...
Страница 59: ......