Christie CineLife+ 4K-RGB, Инструкция по установке и настройке

Страница: 19 / 59

3. Place each component near its installation location.
Lifting and positioning the projector
Safely lift and position the projector in the location where it will be used.
Warning! If not avoided, the following could result in death or serious injury.
• A minimum of four people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
• Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.
This product must be installed in a landscape orientation, with all four feet supported on a level
surface. Do not install or operate the projector in an inverted position. If your site has any installation
requirements other than a typical theater projection booth, contact Christie for assistance.
Before lifting and positioning the projector, refer to the light intensity hazard distances.
1. Position each person at the corners of the projector.
2. Place both hands under the corner, grasping the projector frame.
Do not lift the projector using any feature on the projector skin, such as the skin louvers or
lens opening.
3. Lift up the projector and move it to the location where it will be used.
4. If you are installing the projector with the optional rack stand adapter (P/N: 163-101103-XX),
follow the instructions provided with that accessory. For more information on available
accessories, see the C 4K-RGB Service Guide (P/N: 020-103257-XX).
5. Position the projector so it is centered and parallel with the theater screen. If space is limited,
aim the projector slightly off-center and use lens offset to center the image on the screen.
Related information
Light intensity hazard distance (on page 6)
Connecting to power
The recommended setup is to provide a hard-wired connection to AC power. When connecting the
projector to AC power, follow all electrical codes for your location.
This product is suitable for connection to an IT power distribution system.
Installing and setting up
C 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB 19
020-103244-04 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.