manualshive.com logo in svg

Christie CC50-2301, Руководство по установке

Поделиться
Скачать
Christie CC50-2301 Скачать руководство пользователя страница 16

2-6

CC50-2301/CC67-3001/CC72-3301 Installation Manual

020-100248-03 Rev. 1 

Section 2: Installation and Setup

2. Ensure that the Lens Lock screw is tight.

 Figure 2-5 Lens Lock Screw

NOTE:

 If the lens has been removed, tighten the Lens Lock screw before fastening the 2x M6 Lens Mount 

screws to ensure optical alignment.

2.2.4  Step 4 - Assembling the Pedestals 

It is strongly recommended that PE50/PE67/PE72 pedestals be used to create the platform for a CC50/CC67/
CC72 display wall. These pedestals are designed specifically to support the CC50/CC67/CC72 cube enclosures 
to their maximum stacking limit. Before assembling the pedestal, ensure you have the correct pedestal model 
for your display cube. A CC50 display cube requires a PE50-3602 pedestal, a CC67 requires a PE67-3602 
pedestal and a CC72 requires a PE72-3601 pedestal. Make sure all pedestal models are the same, since there 
are various pedestal heights available.

Tools and Hardware Required

• Level
• 10mm hex wrench or socket driver 
• (4) M6 x 75mm hex screws
• (8) M6 x 18mm flat washers
• (4) lock washers
• (4) M6 hex nuts 
• (4) cable covers

NOTICE!

 

Depending on the size of the wall, assemble the platform beginning with the center two pedestals 

working outwards to the end of each row.

Содержание CC50-2301

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды