LINE
OUT
12
12.5A
1
2
3
4
COM
OUTPUT A
OUTPUT B
ANT
Brio Team
Connect devices
To connect personal devices to Brio and start sharing content, follow the instructions on
the Splash Screen, and then browse to the Brio IP address or DNS name (for example
http://10.10.30.143
or
http://Brio72
) for additional information.
5
Select connection option
•
Using the information on the Splash Screen, reconnect to the Brio WAP after restart.
•
Access the admin page (see step 3) to set up a wireless network for Brio. From the Network
tab in System Settings, choose the desired wireless network. Connect to the wireless network using
the updated information on the Splash Screen.
•
Optionally, use the Brio WAP to connect devices to Brio.
If your touch control is not responding, select the
Toggle touch mapping
button on the General tab in
System Settings: IP address/admin (password: admin).
4
Activate your Brio
•
From your device, prior to using Brio the first time, go to
www.updatebrio.com
and
complete the activation form. Download the current software and documents to a USB drive.
•
On Brio, insert the USB drive into a USB port. From your device, connect the device to the Brio
WAP (Brio’s Wi-Fi) using the information displayed on the Splash Screen (on the Brio outputs).
•
Access the admin page:
Open a web browser and enter
http: //Brio IP address /admin
(password: admin). From the Software tab in System Settings, use the
Update from USB on Brio
button to update your Brio.
This may take several minutes to complete.
3
Finish connections and power on Brio
•
Attach the antenna and connect the speakers to
Line Out
.
Optionally, audio for a DisplayPort may be selected in System Settings.
•
Plug in the power cord and press the
power
button.
2
Connect displays
With Brio powered off, connect a touch display to
Output A
(DisplayPort connector) and
connect the USB cable from the display to a blue USB port. Optionally, connect a second display
to
Output B
(DisplayPort) and to a blue USB port. Set the second display to the right of the first display.
A multi-touch display is required for the touch interface, whiteboarding, and annotating.
1
LIT GUID START Brio Team 020-101701-02 Rev. 1 (7-2015)
Page 1
Brio Team Quick Start Guide
