Christie ACT Скачать руководство пользователя страница 44

Страница: 44 / 74

3-18

Christie ACT User Manual

020-100129-05 Rev. 1 (02-2010)

Section 3: Operation

Config: File Management Tab

The

Config: File Management

tab allows you to backup and restore files, as well as reboot into fail-safe

mode.

Table 3.9 Summary of Config: File Management Tab

CONFIG: FILE MANAGEMENT OPTIONS

Backup

Backing up your configuration files.

1. Click the button to open the

Backup

window.

2. Select an item to backup from the list.

3. Click

Backup

to create and save a backup .tar file for the selection. The file is automatically

assigned a name based on the selection.

Upload and Restore

To restore you must have done a Backup to create the necessary files.

1. Click the

Browse

button to open the Windows

Choose File

window.

2. Navigate and select the files that were backed up on your network and click

Open

3. Click the

Restore

button to open the

Restore

window.

4. Select from the list what you are restoring (scripts, users, preferences, or config).

5. Click

6. Click the

Restore

button.

Rebooting to Failsafe

This reboots Christie

ACT

into a Failsafe mode which is the first step required when conducting a

software upgrade. The

Upgrade/Versioning

window appears.

The

Upgrade

tab offers 3 buttons which are used during the upgrade process.

•

Refresh

- once in Failsafe mode, the Refresh button reloads the Upgrade Packages list. After

you ftp a file to Christie

ACT

, click

Refresh

to view the file in the list.

•

Upgrade

-Upgrades the selected file.

•

Reboot

- Reboot Christie

ACT.

To complete the upgrade process, refer to

Section 3.8 Upgrading Christie ACT Software

The

Versioning

tab displays the software currently installed on Christie

ACT

Reboot System

This will re-load / re-initialize the system as if it had just been powered on and booted up. This will also
execute the OnDeviceStartup event when boot-up is complete.

Factory Defaults

Click to restore factory defaults for Christie

ACT

’s scripts and users. Click the appropriate radio button

to revert to Default Scripts or Default Users.

NOTE

You can make only one reset option at a time.

Create a backup file for

specific settings, such as

user, configuration, and

preferences.

Retrieve backup files that

were saved on a local net-

work (PC) or restore

previously saved settings

using the restore button.

Places

ACT

in Fail-safe

mode. This is required

during software
Reboot will reload and

re-initialize the system.

Figure 3-20 Config: File Management Tab

Содержание ACT











































































Результаты поиска

Содержание ACT

Отзывы:

Бренды по названию

Популярные бренды

Christie ACT, Руководство пользователя

Результаты поиска

Содержание ACT

Отзывы:

Бренды по названию

Популярные бренды