manualshive.com logo in svg

Christie 174-005106-XX, Инструкция по установке и настройке

Поделиться
Скачать
Christie 174-005106-XX Скачать руководство пользователя страница 47

Regulatory

This product conforms to the latest regulations and standards related to product safety,

environmental, and electromagnetic compatibility (EMC) requirements.

Safety

•

IEC/EN 60598-1 Luminaires – Part 1: General requirements and tests

•

IEC 62471-1 – Photobiological Safety of Lamps and Lamp Systems

•

IEC/TR 62471-2: Photobiological safety of lamps and lamp systems - Part 2: Guidance on
manufacturing requirements relating to non-laser optical radiation safety

Electro-magnetic compatibility

Emissions

•

CISPR 15-2015, Class A– Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar equipment

•

EN 55015: Emission – Electrical lighting and similar equipment

•

IEC 62493: Assessment of lighting equipment related to human exposure to electromagnetic
fields

•

IEC 61000-3-2/EN61000-3-2 - Limits for Harmonic Current Emissions

•

IEC 61000-3-3/EN61000-3-3: Limitations of Voltage Changes, Voltage Fluctuations, and Flicker

Immunity

•

EN 61547: Immunity – Equipment for general lighting purpose

Environmental

•

EU Directive (2011/65/EU) on the restriction of the uses of certain hazardous substances
(RoHS) in electrical and electronic equipment and the applicable official amendment(s).

•

EU Directive (2012/19/EU) on waste and electrical and electronic equipment (WEEE) and the
applicable official amendment(s).

•

Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of
chemicals (REACH) and the applicable official amendment(s).

•

China Ministry of Information Industry (along with 7 other Government Agencies) Order No.32
(01/2016) on the control of pollution caused by electronic information products, hazardous

 

CounterAct Installation and Setup Guide

47

020-103456-01 Rev. 1 (09-2021)

Copyright 

©

 2021 Christie Digital Systems USA, Inc. All rights reserved.

Содержание 174-005106-XX


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды