Christie 130-002103-01, Руководство пользователя

Страница: 83 / 144

Error Codes
Matrix StIM™ WQ/SIM WQ User Manual 71
020-100883-01 Rev. 2 (06-2013)
Error Codes
If the status display window shows any of the codes in the table below you may need a Christie
accredited service technician to repair the component identified by the error code.
Error codes are displayed in a 3-phase format:
• First 2 digits represent the component or error category
• Second 2 digits represent the specific problem
• Display off
This cycle repeats. The LED will be red while the error code is displayed.
Acknowledge and clear the error by pressing Exit twice. If the error recurs then try resetting the
projector by powering Off and On again. Contact the dealer if the problem persists or if you see a
code not listed in the table below.
Error Code
(7-segment
display)
Description
Light Engine
LE Light engine error
Engine error (typically during power-up)
Link
LI Link down
Communication link status (internal communication error)
Temperature Sensor
SP Temperature sensor error (index number following tracks SST response IDs)
41 Air inlet error
42 Power supply 0
43 Power supply 1
44 FCB board
45 QD board
46 DMD
47 QD FPGA
48 QPC board
49 QPC CPLD
50 QPC FPGA
51 Red SAM
52 Green SAM
53 Blue SAM