Touch-it CE OEM glass 7
Instruction Manual
Document No.: PA10009463
3 / 24
Dez. 2021, Revision 01
1
Identification
Target group
This document is not intended for end customers! Necessary safety instructions for the end customer
must be passed on by the machine builder or system provider and adopted in the respective national
language.
Intended use
This product has not been designed, developed and manufactured for use that creates fatal risks and
hazards without exceptionally assured safety measures. These include death, injury, or serious physical
harm or otherwise caused loss. These represent nuclear response monitoring, nuclear control systems,
air traffic control, mass transportation control, medical life support systems, and weapons systems con-
trol.
Technical changes
Christ-Electronic Systems GmbH reserves the right to change the information, designs and technical
data contained in this documentation without prior notice.
Copyright
No part of this documentation may be reproduced in any form or processed, duplicated or distributed
using electronic systems without the prior written consent of Christ Electronic Systems GmbH. Even trans-
lation into another language requires written permission. This documentation is entrusted exclusively to
the owner of the device or employees of Christ Electronic Systems GmbH for personal use.
Trademarks
Trademark and product names are trademarks or registered trademarks of their respective owners.
History
The following editions of the manual have already been published:
Version
Comment
10/2021
First edition
12/2021
Adding the name plate
Table 1: History
