Touch-it CE OEM glass 7
Instruction Manual
Document No.: PA10009463
20 / 24
Dez. 2021, Revision 01
8
Standards and Approvals
8.1
CE Marking
The device has been tested in accordance with the applicable EU
directives and the associated harmonized standards.
NOTICE
Decleration of Conformity
The declaration of Conformity can be downloaded from the Christ Electronic
Systems Homepage.
8.2
RoHS
The device complies with the requirement of the EU Directive
RoHS 2011/65/EU.
8.3
Electromagnetic Compatibility
The device complies with the requirements of the EU Electromagnetic Compatibility Directive
2014/30/EU with the harmonized standards listed below:
EN 55032: 2015 Class A
Electromagnetic compatibility of multimedia equipment - Emis-
sion Requirements
EN 55035: 2017
Electromagnetic compatibility of multimedia equipment - Immun-
ity requirements
8.4
FCC Approval
The device meets the requirements of FCC for approval in the
USA and Canada. This has been tested and confirmed by SGS.
FCC (Federal Communications Commission)
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause any harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operations.
Changes or modifications not expressly approved by the party responsible for compliance could void
theuser’s authority to operate the equipment.
NOTE:This equipment has been tested and found comply with the limits of Class A digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a commercial environment. This equipment generates, uses and can radiate ra-
dio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Operation of this equiment in a resident area is likely to
