Christ MAGNUM C5X00, Руководство по эксплуатации

Страница: 60 / 124

Chapter 9
Software
60 6501288-EN / 04
•
Select the menu level Machine , Operation terminal or Wash cards with the key [

]
or [

] and confirm with the key [E] .
The keys on the operation panel are assigned as follows.
• Increase the value.
• Put the value to ON.
•
Decrease the value.
• Put the value to OFF.
•
Scroll forward in the current menu.
•
Scroll backward in the current menu.
•
Exit the menu progressively.
•
Select the menu.
•
Confirm the settings.
• Set the input to the minimum value.
• Input digits.
9.2.2 Menu Machine
•

9.2.1 Access, page 59.
9.2.2.1 Menu Information
Level Value Unit min. max. Remark
Information Information - menu
Power measurement data Power measurement data -
menu
DW: current value 0 0 255 Current power measurement
value of the horizontal brush
DW: idle run 0 0 255 Last recorded power meas-
urement value of the horizon-
tal brush
SWR: current value 0 0 255 Current power measurement
value of the lateral brush right
SWR: idle run 20 0 255 Last recorded power meas-
urement value of the lateral
brush right
SWL: current value 0 0 255 Current power measurement
value of the lateral brush left
SWL: idle run 20 0 255 Last recorded power meas-
urement value of the lateral
brush left
Drive unit position 0 cm -999 9999 Current position of the drive
unit
Horizontal brush position 194 cm -999 9999 Current position of the hori-
zontal brush
Position HP horiz. beam 80 cm -999 9999 Current position of the high-
pressure beam / nozzle sup-
port
Cycle time maximum 20 ms 0 9999 Maximum cycle time of the
program
CPU temperature 54 °C -999 9999 Current temperature of the
CPU
Key assignment
Access