Chore-Time Valego RDE-58, Инструкция по эксплуатации, Страница: 26 / 46

Installatio
n
Valeg
o
® R
D
E-58 with
Fla
t Ro
of In
stru
ctio
n Man
u
al
26
ME
24
89
A
Expulsion Shaft Couplings
1.Move the Motors/Expulsion Shafts into the forward position as shown .
2.Slide Single Sided Tooth Wheels (Item 3) onto four Expulsion Shaft Couplings (Item 2) oriented as shown.
3.Attach the Expulsion Shaft Couplings to the Motor Shaft Couplings using Chain and Shackle Duplex’s (Item 1) .
4.Orient the Toothed Wheels with the Set Screws toward the front of Nest and up as shown .
5.Tighten the four Set Collars (Item 4) on the Mounting Profile Expeller Pipes.
Figure 30.Expulsion Shaft Couplings
2
4
3
Teeth toward inside
Expulsion Tubes in the
forward position.
Set Screw: Orient Wheel with one Set Screw
toward front and one up for easier adjustment later.
2
2
Item Description Part No.
1 Chain & Shackle Duplex 603113
2 Expulsion Shaft Coupling 603112
3 Single Sided Toothed Wheel 600622
4 32MM Dia. DIN705A Set Collar 201140
Step 1
Step 2 and 3
Step 4
Step 5
Motor Shaft Coupling
Set Screw
Set Screw
4
1