171.892UK User Manual
Transmitter front panel
1.
Power button
2.
Up, Down, Set buttons
3.
Input Level control
4.
6.3mm stereo headphone jack
5.
Headphone volume control
Transmitter rear panel
6.
DC inlet
7.
Left & Right XLR/jack inputs
8.
Pad level switch
9.
BNC antenna connection
Bodypack receiver
10.
3.5mm stereo headphone jack output
11.
Volume and on/off control
12.
Antenna
13.
LED indicator
14.
LCD display
15.
Control and battery compartment
Bodypack controls
Setting up
Connect the monitor mix signal from a mixing console to the transmitter unit via the left and right
XLR/jack inputs on the rear panel. The PAD switch (8) cuts the signal by -12dB for high level input.
Connect the supplied antenna to the rear BNC connection and extend fully. Connect the supplied DC
adaptor to the DC inlet on the transmitter unit and a mains socket, observing the correct voltage.
Flip open the front cover of the bodypack receiver and insert 2 x AA batteries (supplied), whilst
observing the correct polarity. Making sure the Volume/On/Off rotary control (11) on the bodypack is
turned off, connect the in-ear monitor headphones to the 3.5mm jack output (10).
ESC
Press to exit current function
Press to increase parameter
Press to decrease parameter
SET
Press to enter settings
