Chison SonoEye P2, Руководство пользователя

Страница: 26 / 74

Digital Color Doppler Palm Ultrasound System
21
cable while wrapping it.

Store all systems in their original cases or wrap them in soft cloth or foam to prevent damage.

Replace gel and other essential accessories in the appropriate storage case.

Ensure that no loose items are left.
When Moving the System

Take extra care when you move the system long distances.

Use extra care when crossing door or elevator thresholds.
Caution

Walk slowly and carefully when moving the system
.

Be sure the pathway is clear.

Do not let the system strike walls or doorframe.
Transporting the System
After preparing the system as described above, take the following additional precautions:

Before transporting, place the system in its original storage carton.

Drive carefully to prevent damage from vibration. Avoid unpaved roads, excessive speeds, and erratic
stops or starts.
3.5 Powering the System
3.5.1 Acclimation Time
After being transported, the unit requires one hour for each 2.5 ºC increment if its temperature is below 10
ºC or above 38 ºC.
3.5.2 Connecting the Electric Power
After making sure the power supply on displayer is normal status, and the voltage type is matched to the
power requirement indicated on the label of system, then connect the connector with displayer.
3.6 The System
Caution
Before connecting the system, please carefully check the system lens, system cable and system connector
to see whether there is anything abnormal, such as cracks, falls off. Abnormal system is not allowed to
connect to the system; otherwise there is possibility of electricity shock.

Connect the connector from the SonoEye P2 system to displayer.
Caution

The system can only be disconnected with displayer while the power supply is off to prevent damage to