Chipkin CAS 2700-02 VeederRoot, Руководство пользователя

Страница: 40 / 67

Chipkin™ VeederRoot® Gateway User Manual
3381 Cambie Street, #211 © 2018 Chipkin Automation Systems
Vancouver, BC, Canada, V5Z 4R3 All rights reserved
1-866-383-1657 Chipkin.com Page 40 of 67
Tank04_tank_missing_delivery_ticket_warning 40338 1 0 = Normal, 1 = Alarm
Tank04_tank/line_gross_leak_alarm 40339 1 0 = Normal, 1 = Alarm
Tank04_delivery_density_warning 40340 1 0 = Normal, 1 = Alarm
Tank04_tank_unknown_alarm 40341 1 0 = Normal, 1 = Alarm
Table 5.2-1 - Example Modbus Map
Test Procedure Using the CAS Modbus Scanner
You can test the Modbus TCP data using the free test software provided by Chipkin Automation
Software. The software can be downloaded at
http://www.chipkin.com/cas‐modbus‐scanner .
To Configure the CAS Modbus Scanner:
1. Add a connection (specify the IP address of the gateway)
2. Add a device to the connection (specify the configured slave ID)
3. Add a request to the device (read holding register offset=1 Length=100)
4. Click the Poll button
5. Use the values found in the int16 column and the data map table to review the data.
Figure 5.2-1 - Configuring the CAS Modbus Scanner