www.chinowing.com
15
4. With 7.4-12v DC power supply, S1-S3 indicators ON, it indicates the successful
connection between transmitter and remote control
5. Video interface is LAN port, LED light of LAN port will flash after the
successful connection.
6. If you are using a dual S-BUS receiver. Both S-BUS1 and S-BUS2 can output the
CH1 to CH16 of the remote control. The output of S-bus1 and S-bus 2 can be
mapped separately. Pls refer to the output mapping description.
The receiver power is 1W by default, please keep the receiver antenna away from other
electronic devices (GPS, compass, etc.) to avoid interference with it and affect the flight.
Make sure to install the antennas before power-on, otherwise it may burn out the radio module.
When using, the antenna, try to make the antenna downward and no obstacle blocking, to
avoid the communication distance is shortened due to blocking, or even unable to
communicate.
Be sure to use the specified type of antenna and install it correctly. It is forbidden to use
other types of antennas.
5.3 V30 Receiver
5.3.1 V30 Receiver Indicator&Port Instruction
Front view
