- 9 -
4-4. Remote Contact Check
This check is available only on units with remote contacts (option). You can check if the unit recognizes the remote contact input
status (short/open) correctly. Short or open each remote contact terminal and check the input status ON/OFF on the display.
1. Operation procedure
(1) Select check item
Pressing the
key changes check item. Select
.
(2) Check input signal
When the
key is pressed while all remote contact terminals are OFF,
is displayed. Then
turn ON (short) each remote contact terminal to see how the display changes. When the ON/OFF status is
recognized correctly, the display value will change depending on the remote contact terminal number.
(3) Complete
check
When the above check is completed, press the
key.
(4) How
to
end
Press the
key and select
, and then press the
key.
The mode changes to [Operation mode] when the
key is pressed on the passcode entry window
(
).
2. Operation flow chart
(1)
(2)
(3)
(4)
Check remote contacts
All remote contact
terminals are OFF (open)
Option
Option
Example:
Remote contact No. 17
When turned ON
(shorted), the display
changes.
When remote contact terminals are ON (shorted), following
values will be displayed depending on the remote contact No.
providing that the remote contact input is recognized correctly.
Remote
contact No.
Display
Remote
contact No.
Display
1 1 11
1024
2 2 12
2048
3 4 13
4096
4 8 14
8192
5 16 15
16384
6 32 16
32768
7 64 17
65536
8 128 18
131072
9 256 19
262144
10 512 20
524288
Display and meaning
Reference
Register passcode “07789”