[DB600] General Instruction Manual
- 5 -
1-1-3
Important
Warning
To avoid severe accidents, make sure to read and understand the
followings and use the instrument.
Confirm the power supply voltage and wiring
Before supplying the power to the instrument, check that the wiring is correct and power supply voltage
matches with the rated voltage etc.
Install circuit breaker
The instrument does not have a power supply switch. Install a circuit breaker that matches the rating
specifications in the power supply of the instrument.
Protection of terminal
To prevent electric shock, provide the terminal of the instrument with safety measures such that the user
will not be able to touch the final product directly.
Installing the safety device
Regarding the use of a device that anticipates a big loss due to failure of the instrument and the peripheral
devices, always install a safety device for preventing these losses and implement fail safe design in the
final product. Do not use it in important facilities in which human life, atomic energy, aviation, space etc.,
are involved.
Do not put your hands inside the instrument
Do not put your hand and tool inside the instrument. You may get an injury or an electric shock.
Power cut off in case of suspicion
If there is an offensive smell, a strange noise or smoke or if the temperature increases abnormally, it is
very risky hence cut off the power supply immediately and contact the dealer or our nearest office.
Prohibiting repairing and remodeling
If repairing or remodeling is necessary, contact the dealer or our nearest office. Only the service engineers
appointed by our company will change the parts, do the repairing and remodeling.
Strictly follow the instruction manual
In order to use the instrument correctly and safely, follow this instruction manual. Please understand
beforehand that our company will not at all be responsible for any claims for injury, damage, and passive
damage due to wrong use of the product.
！
