Chino DB600 Series, Инструкция по эксплуатации

Страница: 42 / 150

[DB600] General Instruction Manual
- 40 -
3-3 Character display
11-segment is used for display of this instrument. Display of alphabet, numbers and sign as follows.

Alphabet
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Numbers
1 2 3 4 5 6 7 8 9 0

Sign
・
special characters
． －
-1
＜ ＞ ／
°
。 ￣ ＿
3-4 Name and function of key
Key Name Operating condition Function
[MODE] key Key long press for about 1
second
Depends on the screen of which key is pressed at,
following screen is displayed.
･
Displays operation initial screen, when displaying
operation screen except for operation initial screen.
･
Displays initial screen of MODE0, when displaying
operation initial screen of operation screen.
･
Displays operation initial screen, when displaying
initial screen of setting screen.
･
Displays initial screen of setting screen, when
displaying setting screen except for initial screen.
[SELECT] key
(REVERSE)
Key press except while
setting/ changing of
parameter Switches operation screen or MODE screen in
reverse direction.
[CANCEL] key Key press while
setting/changing of
parameter
While setting/changing of parameter (dot at first digit
of setting value blinks), setting/changing can be
canceled. After the cancelation, dot blinking of setting
value turns OFF.
[A/M] key
Key long press for about 1
second Switches AUTO/MAN of output 1/output 2.
Operates while displaying operation screen.
It cannot be operated while displaying setting screen.
When switch to the MANUAL output, it will be switch
to the PV/OUT1 (operation screen) automatically.
[ > ] key
Changing of more than 2
digits of numerical value
setting parameter Moves cursor for setting parameter to the right when
setting numeric value on the parameter setting
screen.
It cannot be operated while displaying operation
screen.
[
∨
] key
Key press at the screen
which of setting
parameter is changeable Decreases (decrement/changing of parameter)
setting parameter and initial screen of each setting
screen.
[
∧
] key
Key press at the screen
which of setting
parameter is changeable Increases (increment/changing of parameter) setting
parameter and initial screen of each setting screen.
[ENTER] key Key press while
setting/changing of
parameter
Registers setting/ changing parameter. After the
registration, dot blinking of setting value of setting/
changing parameter turns OFF.
[SELECT] key Key press except while
setting/ changing of
parameter
Switches operation screen and MODE screen to the
forward direction.