Chilipepper CP9000 Скачать руководство пользователя страница 1

Страница: 1 / 8

Chilipepper CP9000

Installation Instructions

READ BEFORE INSTALLING:

* The Chilipepper is not designed to be connected with rigid piping like copper or

galvanized pipes. *Flexible hoses MUST be used.

* The Chilipepper fittings are designed for flexible hoses that have a rubber gasket to

make a water-tight seal.

* Do not use putty/pipe dope on the fittings for the Chilipepper.

*Teflon tape is ok, IF USED CORRECTLY, and the Teflon tape does not get inside the

pump head.

WARNING: Risk of electric shock. This pump is supplied with a grounding conductor

and a grounding-type attachment plug. To reduce the risk of electric shock, be

certain that it is connected only to a properly grounded grounding-type receptacle.

Package Contents

Items Needed to Install the Chilipepper

The Chilipepper Appliance

110 Volt Outlet

Remote Key Fob

Two Braided type hoses:

Brass Fitting with Temperature Sensor

3/8" Comp x 1/2" FIP

White Washer for Brass Fitting

Wrench for the hoses

2 - Brass “T” Fittings

Hex Adjusting Tool

Screw Driver for Adjusting Temperature

Setting & Remote Codes

Helpful troubleshooting tips are at the back of this booklet.

Chilipepper Sales, Inc., 1410 Greg Street, Suite #408, Sparks, NV 89431

Содержание CP9000








