Chiko CBA-080AT3-HI, Инструкция по эксплуатации

Страница: 56 / 70

Chapter 5 Maintenance and Checkup
CMN004-005
53
E
nglis
h
5.1.4 Replacing the Motor Cooling Exhaust Filter (CBA-
1200AT3-HI-V1 Only)
1.
Loosen the four screws from the top and
remove the motor cooling port cover.
2.
Replace with a new motor cooling exhaust
filter.
3. Install the motor cooling port cover back in
place.
5.2 Replacing Fuses
Replace one fuses if any of them is blown by an overcurrent due to trouble with internal equipment.
The fuses are contained in the black box on the left of the power switch.
The replacing fuses should be those designated by CHIKO AIRTEC.
Designated fuses: 218 Series from Littell fuse
250V 10A
（
CBA-080/500
）
15A
（
CBA-1200/2000
）
1.
Open the cover of the fuse box.
The cover cannot be removed.
2.
Take out the fuse box using a flathead
screwdriver or other thin-tipped tool.
3.
Remove the fuses out of the fuse box and
replace with new ones.
Screws
Motor cooling port cover
Motor cooling exhaust filter
Cover Fuse
Screws