CHIEF Kontour K4G210, Руководство по установке

Страница: 11 / 16

Installation Instructions K4G210-310
11
Faceplate Assembly Removal
1. Remove hex head bolt from bottom of faceplate assembly.
(See Figure 20)
2. Slide out removable plate from bottom of faceplate
assembly. (See Figure 20)
Figure 20
3. Remove faceplate assembly from array arm. (See Figure
20)
To Reattach Faceplate Assembly
4. Place faceplate assembly on array arm at desired mounting
position. (See Figure 21)
5. Slide removable plate back into slot at bottom of faceplate
assembly. (See Figure 21)
6. Reinstall hex head bolt removed in Step 1 to secure
faceplate assembly to array arm. (See Figure 21)
Figure 21
Lateral Shift
1. Loosen knob on top of faceplate assembly until faceplate
can slide freely along array. (See Figure 22)
2. Adjust lateral position as desired. (See Figure 22)
3. Tighten knob to secure lateral position. (See Figure 22)
Figure 22
Pitch/Roll/Yaw Adjustment
1. Loosen knob on top of faceplate assembly. (See Figure 23)
2. Adjust pitch, roll and/or yaw as desired. (See Figure 23)
3. Tighten knob to secure desired faceplate position. (See
Figure 23)
Figure 23
removable plate
1
2
3
removable plate
5
6
4
2
1 3
2
2
1
3
2