02/04/2013
PM 2946 7002 09
Page 25 of 39
19 Calling up/modifying CAN address control
19.1 Calling up
Starting from the Main screen:
1.
Press Scroll button (12) until <
P.02
> is shown.
2.
Press
Enter
button (13).
3.
If necessary enter the password.
The next screen shows that the function is
ON
or
OFF
.
4.
Press the
Enter
button (13) to change this mode.
5.
Use the Scroll buttons (12) to select <
ON
> or <
OFF
>.
6.
Press
Enter
to program.
7.
When this function is
ON
, use the Scroll buttons up or down (12) to see the node ID.
8.
If desired the user can change this ID., by pressing the
Enter
button (13).
The node ID value starts blinking.
9.
Use the
Scroll
buttons (12) to change the node ID.
10.
Press the
Enter
button (13) to program the new node ID or press the
Escape
button (14) to leave this screen or to
cancel this operation.
1
