background image

SKU 91924

Page 3

For technical questions, please call 1-800-444-3353.

ELECTRICAL SAFETY

4.

Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances.  Never remove the
grounding prong or modify the plug in any way.  Do not use any adapter
plugs.   Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded.
  If the tool should electrically malfunction or
break down, grounding provides a low resistance path to carry electricity away
from the user.

5.

Double insulated tools are equipped with a polarized plug (one blade is
wider than the other).  This plug will fit in a polarized outlet only one way.  If
the plug does not fit fully in the outlet, reverse the plug.  If it still does not
fit, contact a  qualified electrician to install a polarized outlet.  Do not
change the plug in any way.
  Double insulation       eliminates the need for the
three wire grounded  power cord and grounded power supply system.

6.

Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators.  
There is an increased risk of electric shock if your
body is grounded.

7.

Do not expose power tools to rain or wet conditions.  Water entering a power
tool will increase the risk of electric shock.

8.

Do not abuse the Power Cord.  Never use the Power Cord to carry the tool
or pull the Plug from an outlet.  Keep the Power Cord away from heat, oil,
sharp edges, or moving parts.  Replace damaged Power Cords immedi-
ately.
  Damaged Power Cords increase the risk of electric shock.

9.

When operating a power tool outside, use an outdoor extension cord
marked “W-A” or “W”.  
These extension cords are rated for outdoor use, and
reduce the risk of electric shock.

PERSONAL SAFETY

10.

Stay alert.  Watch what you are doing, and use common sense when oper-
ating a power tool.  Do not use a power tool while tired or under the influ-
ence of drugs, alcohol, or medication.
  A  moment of inattention while operat-
ing power tools may result in serious personal injury.

11.

Dress properly.  Do not wear loose clothing or jewelry.  Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
  Loose clothes,
jewelry, or long hair can be caught in moving parts.  A long-sleeved jacket and
jeans are recommended during use.

Содержание 91924















Отзывы: