background image

3. 

Keep bystanders, children, and visitors away while operating a power tool.

 

Distractions can cause you to lose control.  Protect others in the work area from    

 

debris such as chips and sparks.  Provide barriers or shields as needed.

ELECTRICAL SAFETY

4. 

Grounded tools must be plugged into an outlet properly installed and  

 

 

grounded in accordance with all codes and ordinances.  Never remove the    

 

grounding prong or modify the plug in any way.  Do not use any adapter

 

plugs.  Check with a qualified electrician if you are in doubt as to whether    

 

the outlet is  properly grounded.

  If the tools should electrically malfunction or    

 

break down, grounding provides a low resistance path to carry electricity away    

 

from the user.

5. 

Double insulated tools are equipped with a polarized plug (one blade is  

 

 

wider than the other).  This plug will fit in a polarized outlet only one way.  If   

 

the plug does not fit fully in the outlet, reverse the plug.  If it still does not    

 

fit, contact a qualified electrician to install a polarized outlet.  Do not   

 

 

change the plug in any way.

  Double insulation       eliminates the need for the    

 

three wire grounded power cord and grounded power supply system.

6. 

Avoid body contact with grounded surfaces such as pipes, radiators,   

 

 

ranges, and refrigerators.  

There is an increased risk of electric shock if your    

 

body is grounded.

7. 

Do not expose power tools to rain or wet conditions.  

Water entering a power  

 

tool will increase the risk of electric shock.

8. 

Do not abuse the Power Cord.

  

Never use the Power Cord to carry the tools   

 

or pull the Plug from an outlet.  Keep the Power Cord away from heat, oil, 

 

sharp edges, or moving parts.  Replace damaged Power Cords immediately.

   

 

Damaged Power Cords increase the risk of electric shock.

9. 

When operating a power tool outside, use an outdoor extension cord   

 

 

marked “W-A” or “W”.  

These extension cords are rated for outdoor use, and    

 

reduce the risk of electric shock.

PERSONAL SAFETY

 

10. 

Stay alert.  Watch what you are doing, and use common sense when

 

operating a power tool.  Do not use a power tool while tired or under the

 

influence of drugs, alcohol, or medication.

  A  moment of inattention while  

 

 

operating power tools may result in serious personal injury.

SKU 90186   

 

 

 

PAGE 3

Содержание 90186




















Отзывы: