background image

Page 8

For technical questions, please call 1-800-444-3353.

Item 69231 

        

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Vibration Safety

This tool vibrates during use.  Repeated or long-term exposure to vibration may cause temporary or permanent 

physical injury, particularly to the hands, arms and shoulders.  To reduce the risk of vibration-related injury:

1.  Anyone using vibrating tools regularly or for an extended period should first be examined by 

a doctor and then have regular medical check-ups to ensure medical problems are not being 

caused or worsened from use.  Pregnant women or people who have impaired blood circulation 

to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should 

not use this tool.  If you feel any medical or physical symptoms related to vibration (such as 

tingling, numbness, and white or blue fingers), seek medical advice as soon as possible.

2.  Do not smoke during use.  Nicotine reduces the blood supply to the hands 

and fingers, increasing the risk of vibration-related injury.

3.  Use tools with the lowest vibration when there is a choice between different processes.

4.  Include vibration-free periods each day of work.

5.  Grip tool as lightly as possible (while still keeping safe control of it).  Let the tool do the work.

6.  To reduce vibration, maintain the tool as explained in this manual.  If 

any abnormal vibration occurs, stop use immediately.

 SAVE THESE INSTRUCTIONS.

Содержание 69231

















Отзывы: