background image

 

25 

STAGE PRO

 

Portable Wireless Mixer PA System

 

Does a wireless amplifier need to be installed with a tripod? What is the ideal 
height for Amplifier above the ground? 

Higher position of a wireless PA will be helpful for signal reception. It can be mounted 
on the tripod and above the ear or head of the audience. If the tripod is not allowed on 
site, you can also raise it on a table or a flat object while the amplifier leaves the 
ground by 1 meter or more. 

Will wireless amplifier automatically power off once it is fully charged? Do I need 
to unplug the power cord? 

Yes. Since all CHIAYO amplifiers have an overcharge protection circuit that 
automatically power off at full charge and prevent damage to the system. 
However, please unplug the power cord after fully charging to ensure the safety. 

How to charge and maintain the battery of wireless amplifier? 

After plugging the power cable of the wireless amplifier into a standard outlet, the 
charging LED will glow or flash indicative of charging status.  The wireless amplifier 
can be charged whether power on or off. 

The amplifier's battery has no memory effect and can be charged any time. It is 
suggested to charge the battery right after usage to make the battery life longer. If not 
to use it for a long period, please charge the battery at least every three months for 
lead-acid batteries and six months for lithium batteries. 

The battery life is limited and affected by the environment, charging method and 
battery efficiency.

 

Is it possible that STAGE PRO can work as amplifier only? Can I use only one or 
more microphones? How many wireless microphones can be used at most? 

Yes, each STAGE PRO (or STAGE SLAVE) can work as amplifier. The wireless 
receiver, transmitter and MP3 recorder player (DPR-500m) for 

STAGE PRO

 are 

modular products which can be installed optionally according to application and 
requirement. 

Maximum 4 wireless microphones can be used simultaneously.

 

What is the difference between lead-acid batteries and lithium batteries? 

Lithium battery: light weight, electronic circuit protection, long life and more expensive. 
Lead-acid battery: heavy weight, short life and more affordable. 

 

 

 

Содержание STAGE PRO





























Отзывы: