Chevrolet TRAX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
10122735) - 2017 - crc - 7/12/16
Instruments and Controls
107
This feature can be changed. See
The windshield washer reservoir is
used for the windshield and the rear
window. Check the fluid level in the
reservoir if either washer is not
working. See
.
Compass
The vehicle may have a compass
display in the Driver Information
Center (DIC).
Setting the Compass Zone
Under certain circumstances, such
as during a long trip or moving to a
new area, the compass zone will
need to be reset. If the compass is
not set to the correct zone, it may
give false readings. The compass
zone should be set to the area in
which the vehicle is currently
traveling.
Use the DIC buttons to set the
compass zone:
1. While the vehicle is in P (Park),
press the MENU button to
display the DIC menu.
2. Press and hold SET/CLR while
the Set Area display is active.
3. Find the vehicle's current
location and zone number on
the map. Zones 1 through 15
are available.
4. Use
w x
to change to the
correct zone number.
5. Press SET/CLR to confirm the
setting.
Clock
Radio without Touchscreen
The infotainment system controls
are used to access the time and
date settings through the menu
system. See
on
how to use the menu system.
Setting the Time and Date
When Auto Set is enabled the time
cannot be manually set.
1. Press MENU, then select
Settings.
2. Select Time and Date.
3. Select Set Time or Set Date.
4. Turn MENU to change the
value.
5. Press MENU to select the next
value.
6. Turn MENU to change the
value.
7. To exit without saving, press
BACK at any time; or to save
and return to the Time and
Date menu, press MENU
multiple times.