
Chevrolet Trailblazer Owner Manual (GMNA-Localizing-SE Asia/CenAmer/
Carib-13517615) - 2020 - CRC - 3/22/19
206
Driving and Operating
Manual Transmission
To engage reverse, with the vehicle
stationary, press the clutch pedal.
Press and hold the lever down while
moving the lever to the right and
back towards the position
R
.
If the gear does not engage, set the
lever in neutral, release the clutch
pedal and depress again; then
repeat gear selection.
Do not press the clutch pedal
unnecessarily.
When operating, depress the clutch
pedal completely. Do not use the
pedal as a foot rest.
Caution
It is inadvisable to drive with hand
resting on the selector lever.
Drive Systems
Four-Wheel Drive
If the vehicle has four-wheel drive,
you can send the engine driving
power to all four wheels for extra
traction.
To get the best performance out of
four-wheel drive, you must be
familiar with its operation. You
should use two-wheel drive high for
most normal driving conditions.
Note
Driving on clean, dry pavement in
four-wheel drive for an extended
period of time can cause premature
wear on the vehicle drivetrain.
Note
Do not engage four-wheel drive if
wheels of different sizes are fitted
as damage to the vehicle can result.
The repair would not be covered by
the warranty.
Note
An incorrect usage of the four-wheel
drive may damage the system. Use
four-wheel drive only on tracks with