Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -
CRC - 3/17/21
148
Vehicle Care
5. Insert front end into front wing, slide
forward and insert rear end.
6. Check lamp operation.
License Plate Lamp
1. Unscrew both screws.
2. Remove bulb housing downward, taking
care not to pull on the cable.
Rotate bulb holder anti-clockwise to
disengage.
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb housing and
rotate clockwise.
5. Insert bulb housing and secure using a
screwdriver.
Interior Lamps
Courtesy lamps
1. To remove it, prise the opposite side of
the lamp switch using a flat-blade
screwdriver. (Be careful not to make
scratches.)
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the lamp assembly.
Load compartment lamp
1. Prise the lamp out with a screwdriver.
2. Remove bulb.
3. Insert new bulb.
4. Install lamp.
Instrument Panel Illumination
Have bulbs replaced by a workshop.
Electrical System
Fuses
Data on the replacement fuse must match
the data on the defective fuse. There are
two fuse boxes in the vehicle:
.
In the front left of the engine
compartment