Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-10122660) -
2017 - crc - 5/13/16
Vehicle Care
241
License Plate Lamp
Lamp Assembly
Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the left end of the lamp
assembly toward the right.
2. Turn the lamp assembly down
to remove it.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket
and turn the bulb socket
clockwise to install it into the
lamp assembly.
6. Turn the lamp assembly into
the lamp assembly opening
engaging the clip side first.
7. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-Up Lamp
W16W
Front Fog Lamp
PSX24W
Front Turn
Signal Lamp
7444NA-M
High-Beam
Headlamp
HB3LL
License Plate Lamp
W5W LL
Low-Beam
Headlamp
H11 LL
Rear
Sidemarker Lamp
W21W LL
Rear Turn
Signal Lamp
WY21W
Stoplamp/Taillamp
W21W LL
For replacement bulbs not listed
here, contact your dealer.