Chevrolet 2011 Volt страница 245 Скачать руководство пользователя

Страница: 245 / 478

Black plate (69,1)

Chevrolet Volt Owner Manual - 2011

Infotainment System

7-69

When the vehicle is not receiving
signals from the satellites, a symbol
appears on the map screen. See

Navigation Symbols on page 7

‑

This system might not be available
or interferences can occur if any of
the following is true:

Signals are obstructed by tall
buildings, trees, large trucks,
or a tunnel.

Satellites are being repaired or
improved.

For more information if the GPS
is not functioning properly, see

“

the System Needs Service

”

and

“

Problems with Route Guidance.

”

Vehicle Positioning

At times, the position of the vehicle
on the map could be inaccurate due
to one or more of the following
reasons:

The road system has changed.

The vehicle is driving on slippery
road surfaces such as in sand,
gravel, and/or snow.

The vehicle is traveling on
winding roads or long straight
roads.

Approaching a tall building or a
large vehicle.

The surface streets run parallel
to a freeway.

The vehicle has been transferred
by a vehicle carrier or a ferry.

The current position calibration
is set incorrectly.

The vehicle is traveling at high
speed.

The vehicle changes directions
more than once, or the vehicle is
turning on a turn table in a
parking lot.

The vehicle is entering and/or
exiting a parking lot, garage, or a
lot with a roof.

The GPS signal is not received.

A roof carrier is installed on the
vehicle.

Tire chains have been installed.

The tires are replaced or worn.

The tire pressure for the tires is
incorrect.

This is the first navigation use
after the map data is updated.

The 12-volt battery is
disconnected for several days.

The vehicle is driving in heavy
traffic where driving is at low
speeds, and the vehicle is
stopped and started repeatedly.

Содержание 2011 Volt































































































































































































































































































































































































































































































Результаты поиска

Содержание 2011 Volt

Отзывы:

Похожие инструкции для 2011 Volt

Бренды по названию

Популярные бренды

Chevrolet 2011 Volt, Руководство пользователя

Результаты поиска

Содержание 2011 Volt

Отзывы:

Похожие инструкции для 2011 Volt

Бренды по названию

Популярные бренды