6-9
Then go to the front of the vehicle and lift up on the
secondary hood release handle. The secondary hood
release lever is located near the front center of the hood
toward the driver’s side.
To make sure that the secondary hood release handle
works properly, lubricate the hood latch at least once
a year.
Before closing the hood, be sure all the filler caps are on
properly. Then lift the hood to relieve pressure on the
hood prop.
Release the hood prop
from its retainer and put the
hood prop into the slot in
the hood marked “PROP
ROD.” Use the prop rod
sleeve when handling the
hood prop.
Lower the hood 8 to 10 inches (20 to 25 cm) above
the vehicle and release to close. Check to make sure
the hood is fully secured and repeat if necessary.
