Chevrolet 10 Series 1967, Руководство по обслуживанию, Страница: 462 / 605

STEERING 9-8
Fig. 15— Light Duty Mast Ja c k e t Mounting
lower end of mast jacket through opening in firewall,
guiding the steering coupling onto the steering gear
wormshaft.
2. Loosely install mast jacket support clamp at dash
panel and, on light-duty models, at firewall.
3. Adjust position of mast jacket and tighten clamps at
steering gear and mast jacket supports.
4. On 3-speed and automatic transmission models, con­
nect transmission shift linkage.
5. On 10, 20, and 30 series trucks install parking brake
support and lever assembly, and trim plate at dash
panel.
Fig. 16—Medium and H eavy Duty Mast Ja c k e t
Mounting (T y p ica l)
6
. Install seal at firewall and reconnect parking brake
cable if necessary.
7. Adjust lower mast jacket bearing as outlined under
Maintenance and Adjustments.
8
. Connect wiring.
Disassembly—10-20-30 Series (Fig. 17)
NOTE: For units without shifter tube, omit
Steps 1,
8
, 9, 10 and 11.
Fig . 17—3-Speed Mast Ja ck e t and Shifter Tube
CHEVROLET TRUCK SERVICE M ANUAL