CHESTER Champion 20VS, Руководство по эксплуатации

Страница: 24 / 30

As required Machine lighting Replacement of the
halogen bulb
Turn the milling head into a
horizontal position to the right. The
lamp cover can be easily lifted out
around the halogen bulb.
Put a small screwdriver into the gap
between the bulb socket and lamp
cover.
Rotate the screwdriver to lift the
lamp cover.
Remove the bulb covering it with a
cloth then replace.
Type required:
Halogen pin lamp base, Osram
12V- 20W, base G4.
As required Machine lighting Replacement of the
micro fuse –
electronics
Every six months Geared drill-mill
head
Grease Swivel the drill-mill head completely
to the right (90°).
Check that the clamping screws are
firmly tightened.
Detach the cover plate on the rear
side.
Lubricate the gear wheels. Make
sure that you do not lubricate the
clutch of the spindle sleeve fine
feed.
5.3 Repair
Any maintenance work may only be carried out by a specialized company or by a
duly trained personnel. Any maintenance work on electrical equipment may only be
carried out specialized electrical staff. For any repair work get assistance from our
technical service team.
Chester UK Ltd does not take any responsibility nor does it guarantee against
damage and operating anomalies resulting from failure to observe this manual.
For repairs only use faulty free and suitable tools, original spare parts or parts
authorized by Chester UK Ltd.
24