Safety
-
Installation should be performed only by qualified personnel.
-
Do not use the Remote switch if it is damaged.
-
This product contains a non-replaceable and non-rechargeable Lithium battery.
-
The Remote-switch has protection class IP54 and is suitable for use at indoor and covered
outdoor locations.
Remote Switch
Mymesh Building Light Control
The Mymesh Remote Switch three button is part of the Mymesh Building Light Control prod
-
uct suite for wireless lighting control. The Remote Switch is a wireless light/dimming/scene
switch with a lifetime battery for flexible wall mounting. The Remote Switch enables you to
switch on/off the light, step-less dim the light or select a scene for lighting fixtures equipped
with Mymesh light control.
Application
-
Refer to the Remote switch product sheet (see chess-wise.eu/downloads) for the product
specifications and environmental conditions.
Installation
-
Attach the mounting plate with at least 2 screws or double-sided adhesive tape to a wall or
ceiling. Avoid positions vulnerable for mechanical impact (e.g. by transport carts).
-
Insert the Remote switch at one side in the mounting plate and push the switch until it locks.
by Chess
Installation instruction
