2
- HCL
1.
Bioloog Ian
2.
Kerel met duikbril
Installation instruction mini BLC 4DI
V8.0 / 06-04-2020
www.chess.nl
Application
Refer to the mini BLC 4DI product sheet (see chess.nl) for the product specifications and
environmental conditions.
Installation
•
Install the mini BLC 4DI in the direct neighborhood of other Mymesh products.
•
Mount the mini BLC 4DI with 2x M3 screw/bolt (76 mm distance).
•
Use maximal 1.5 mm2 wiring for all connections. Push the wires completely into the terminal
block. Use wire end sleeves when using flexible wires.
•
Connect the 230VAC supply voltage to the mini BLC 4DI. Connect one up to four contact
inputs and the common GND to external voltage free contacts (see wiring diagram below).
•
One mini BLC 4DI controls one luminaire.
mini BLC 4DI + voltage free contacts:
Antenna mounting
•
Connect the supplied antenna to the antenna connector.
•
The antenna is used for wireless communication with other Mymesh products. Operation of
the antenna should not be disrupted.
o
Do
not
mount the antenna inside a metal housing, flat on a metal surface or directly
next to a large metal object.
o
Some glass and plastic materials such as safety glass, tinted glass and double glass
influence the operation of an antenna.
o
Use a plastic, polycarbonate or fiberglass housing
without
carbon
o
Mount the antenna
outside
the housing/cabinet if necessary. Ensure that the
thickened part at the end of the antenna is positioned
outside
a housing plus 1.5cm of
the antenna cable. Use a grommet for protection of the antenna cable.
230VAC
1
2
3
4
5004.
