Chery RIICH 2 series, Руководство пользователя, Страница: 93 / 141

Emergency Procedures
84
Replace Wheel
1.
Stop your vehicle at a proper position
and make sure it neither affect the
traffic, nor endanger your safety
during the replacement of wheel.
2.
Please ensure that the vehicle is placed
on a stable, level ground. A proper
wedge is required to block the wheel
for further securing your vehicle if
necessary.
3.
Please make sure the front wheels
facing to the right ahead.
4. If the vehicle is equipped with
AT, please select P gear position.
Spare Wheel
The spare wheel is placed under the front
door of passenger side and fixed under the
floor.
Steps of replacing spare wheel:
When the wheel is failed, use the jack to
lift the vehicle at the position near to the
failed wheel. And then counterclockwise
unscrew bolts that fix the spare wheel
bracket by a sleeve in driver tools (as
shown in the figure), when the bolts are
unscrewed that can make the bracket
separating from the bolts, put down the
bracket and take out the spare wheel.
When mounting the spare wheel or failed
wheel, place the wheel in the spare wheel
bracket, lift the bracket by the jack so that
the mounting bolts of the bracket may be
screwed easily in clockwise direction.
When the mounting bolts are tightened (at
the same position as removal), take out the
jack and the installation is finished.
Please follow the
precautions as bellow before
lifting the vehicle.