80
COMMAND MANAGEMENT FROM WHITE WIRE
UP-DOWN “CONTINUOUS MOVEMENT”/ UP-DOWN “DEAD MAN”
The default function provided in the motors leaving the factory is for two independent
buttons “UP-DOWN Continuous Movement”. It’s always possible to change the type
of motor control to “UP-DOWN Dead Man” mode (and viceversa), with the following
sequence:
PROGR.
FROM THE WHITE WIRE
E N G L I S H
2 sec
+
B
C
B
C
CHERUBINI S.p.A. declares that the product is in conformity with the relevant Union
harmonisation legislation:
Directive 2014/53/EU, Directive 2011/65/EU.
The full text of the EU declaration of conformity is available upon request at the
following website: www.cherubini.it.
EU DECLARATION OF CONFORMITY
Use the following sequence to reset the duration of the slat tilting adjustment impulse set
in the factory (short):
The total deletion of the limit switch automatically resets the short slat tilting adjustment
impulse.
From the OPENING position
From the CLOSING position