62
After having memorized the limit switches, perform the following command sequence:
At the end of the sequence, wait until the rolling shutter is completely lowered.
From this moment onwards the motor moves in “Dead Man” mode. This enables the
regulation of the positions to be adjusted precisely.
Carry out the following operations:
• Lower the rolling shutter until the adjustable slats are completely opened;
• If you wish, raise the rolling shutter until it reaches an intermediate opening of the slats
(preferred opening position);
• Press button B on the remote control for 2 seconds: the rolling shutter will move in
sequence to the memorised positions: closed, maximum opening, preferred opening.
Functions of the remote control*
Type of Command
Outside of tilting area
In tilting area
A short (< 2 sec)
Completely raised
Less light
C short (< 2 sec)
Completely lowered
More light
A long (> 2 sec)
Completely raised
Out of tilting area
Completely raised
C long (> 2 sec)
Completely lowered
Out of tilting area
Completely lowered
B short
Stops the motor
-
B long (> 2 sec)
Entry in tilting area
-
B long (> 4 sec)
-
Confirmation of the new
preferred opening position
REMO
TE CONTROL PROGR.
E N G L I S H
SLAT TILTING MECHANISM SETTING
(Not available on Clima RX)
MODE 4
:
Orientable roller shutter with coupling point for tilting
function above the lower limit.
Only for roller shutter type Persyroll / Multiroll / Supergradhermetic / Supernova.
Suitable for centralised control units.
2 sec
+
B
C
+
B
C
+
A
C
* see key to symbols and operational notes