META Wired Motor Controller 7 is an “in wall device”, for the multilevel control of
roller shutter motors. It can accurately control the opening and closing of blinds,
curtains, shutters, venetian blinds as requested by the user through local commands
or remotely using computers, smartphones, tablets. At the same time, it is completely
configurable so that it can adapt to the most varied customers’ needs, while being
ready for use without needing additional configurations in order to operate. After
an initial calibration procedure, thanks to a proprietary algorithm, the device is able
to identify the exact position of the roller shutter without using external sensors.
During the operation, a continuous and automatic control of the limit switches allows
maintaining the calibration. In the absence of a power source, the system runs a self-
repositioning procedure that restores calibration. The device is equipped with contact
protection technology (Zero Crossing) which reduces the electrical stress on the relay
contacts and ensures a longer life. The open / closed switching of the device always
occur when the instantaneous value of voltage is 0. It operates in any Z-Wave™
network with other Z-Wave™/Z-Wave Plus™ certified devices and controllers from
any other manufacturer. As a constantly powered node, the device will act as repeater
regardless of the vendor in order to increase the reliability of the network. This device
is a security enabled Z-Wave Plus™ product that is able to use encrypted Z-Wave
Plus™ messages to communicate to other security enabled Z-Wave Plus™ products.
This device must be used in conjunction with a Security Enabled Z-Wave™ Controller
in order to fully utilize all implemented functions.
Integrated Button
1 or 3 clicks to enter in Learn Mode
6 clicks to reset the system to manufacturer’s settings
2 clicks to enter in setup mode
Power Supply
1 – Null
6 – Line
Open/Close Buttons
2, 3
Motor Contacts
4, 5
4
DEVICE DESCRIPTION
Integrated Button
with LED indicator
E
NG
L
IS
H