Cherry Aerospace G84, Оригинальное руководство пользователя

Страница: 5 / 12

TM-G84
Rev.: H DCR# 15-0406 DATE: 5/5/15
Federal Identification Code: 11815
© 2015 Cherry Aerospace
-8 H562-8B - - -
DIA
CODE
TYPE
BASIC MODEL
H563-5B*
H563SP-5B*
H563-6B*
H563SP-6B*
H513-04-20*
H513-04-35*
H513-04-60*
H513-05-35*
H513-05-60*
STRAIGHT
OFFSET
H513-06-20*
H513-06-60*
H513SRC-05-20*
H513SRC-05-35*
H513SRC-06-20*
H513SRC-06-35*
H513SR-08-24
H513SR-08-48
SWIVEL NOSE
TYPE
SWIVEL NOSE
SELF-RELEASING
TYPE
CHISEL SHAPE
SWIVEL NOSE
SELF-RELEASING
TYPE.
- - -
- -
- - -
H5135-05-20*
H513S-05-35
H513SR-05-20*
H513SR-05-35
-4
-5
-6
-
-4
-5
-6
-8
- -
H513SRC-08-48
-
H513S-08-24
H513S-08-35*
H513S-08-48
H513S-06-20*
H513S-06-24
H513S-06-35*
H513S-06-48
H513SR-06-20*
H513SR-06-24
H513SR-06-35*
H513SR-06-48
H513-08-35*
H563-4B*
H563SP-4B*
L O C K B O L T P U L L I N G H E A D S
H513 SERIES STRAIGHT PULLING
HEADS
The H513 series pulling heads are for 1/8" through 1/4"
diameter lockbolts (see table below).
H562/H563 OFFSET PULLING HEADS
The H562 and H563 series offset pulling heads can be
used in limited access areas.
NOTES:
•
No letter after P/N indicates basic head; "S" code
indicates swivel nose; "SR" code indicates self-
releasing swivel nose;
"SRC" code indicates chisel shape, self-releasing,
swivel nose; "SP" code indicates it intended for short
pintail lockbolts.
•
Part numbers with an asterisk fit directly on the Cherry® G84 tool; the rest require adapter 744-100to fit onto the G84 tool.
MAXIBOLT PULLING HEADS
STEP 1
STEP 2 STEP 3
CHERRYMAX
®
PULLING HEADS
AND ADAPTERS
PULLING
HEAD
PART NO.
CHERRYMAX®
DIAMETER
ADAPTER
H701B-456 -4, -5, -6 744-300
H84A-8
-8 —
H781-456
H782
-4, -5, -6
-4, -5, -6 744-300
744-300
H827-8 -8 744-200
H753A-456 -4, -5, -6
744-300
H828-8 -8
744-200
STRAIGHT
OFFSET
RIGHT
ANGLE
MAXIBOLT DIA. DESCRIPTION ADAPTER
-5
-6
-8
-8
-8
EXTENDED REACH (6" LONGER)
-5 OR -6 OR -8
PREVENTS HEAD LIFT ON 130 HEAD FASTENERS
-5, -6, -8 MB Plus
FOR MAXIBOLT PLUS FASTENERS
OFFSET -6 744-200
-5 744-200
-6 744-200
-8 744-200
-8
FOR MAXIBOLT PLUS FASTENERS
744-200
H828-8MB
H828-56MBP
FOR SINGLE ACTION MAXIBOLT.
RIGHT ANGLE
H828-6MB
PART NO.
H83B-5MB/5MBU
H83B-6MB/6MBU
H84A-8MB/8MBU
H84HL-5 OR 6 OR 8
H856-6MB
H828-5MB
H84C-8MB
H84B-568
STRAIGHT
PULLING
HEADS
N/A
FOR SINGLE ACTION MAXIBOLT. USE "MBU" FOR
"U" TYPE FASTENERS
H84CE6-8MB
ADAPTOR MOUNTING INSTRUCTIONS
STEP 1 Remove Bayonet mount with square shank screwdriver. Use even force to turn the bayonet mount free from the thread locking compound.
Do not hammer on the screw driver or bayonet mount. We recommend placing the tool carefully in a vise equipped with soft jaws. Store it for future use.
STEP 2 Attach Drawbolt Adapter to head piston and tighten securely.
STEP 3Attach the Sleeve Adapter and tighten securely
5