Chelsio Communications Terminator Series, Инструкция по установке и эксплуатации, Страница: 41 / 54

Chapter II. FCoE Storport Miniport
Chelsio Unified Wire for Windows 41
1. Introduction
Fibre Channel over Ethernet (FCoE) is a mapping of Fibre Channel over selected full duplex IEEE
802.3 networks. The goal is to provide I/O consolidation over Ethernet, reducing network
complexity in the Datacenter.
Chelsio FCoE initiator maps Fibre Channel directly over Ethernet while being independent of the
Ethernet forwarding scheme. The FCoE protocol specification replaces the FC0 and FC1 layers
of the Fibre Channel stack with Ethernet. By retaining the native Fibre Channel constructs, FCoE
will integrate with existing Fibre Channel networks and management software.
1.1. Hardware Requirements
Supported Adapters
The following are the currently shipping Chelsio adapters that are compatible with Chelsio FCoE
storport miniport driver:
T6225-CR
T6225-LL-CR
T520-CR
T520-LL-CR
T540-CR
1.2. Software Requirements
Windows Requirement
Currently Chelsio FCoE Storport Miniport driver is available for following Windows versions:
Server 2016
10 Client
Server 2012 R2