Chelsio Communications Terminator Series, Инструкция по установке и эксплуатации, Страница: 39 / 54

Chapter I. Chelsio Unified Wire
Chelsio Unified Wire for Windows 39
6.2. Zip Package
If the driver components were installed using the zip package, they will have to be uninstalled
manually. The following section lists the various components and their respective methods of
uninstallation.
NDIS Miniport driver
i. Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the Network Adapters , right click on the Chelsio Network Adapter and
select Uninstall.
ii. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
Repeat the same procedure for the other Chelsio Network Adapters.
FCoE Storport Miniport
Open the Device Manager (Control Panel -> System & Security-> System -> Device Manager),
click on Storage controllers , right-click on Chelsio [FCoE] function and select Uninstall.
Virtual Bus Driver
i. Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the System Devices , right click on the Chelsio Bus Enumerator and
select Uninstall.
ii. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
Generic Function
i. Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the Network Adapters , right click on the Chelsio Generic Function and
select Uninstall.
ii. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
Repeat the same procedure for the other Generic Functions.
Important
The driver components need to be uninstalled strictly in the order described
here. Using any other order is not supported.