Chelsio Communications Chelsio T4 Скачать руководство пользователя страница 175 | Manualshive

Страница: 175 / 511

Chelsio Communications Chelsio T4 Скачать руководство пользователя страница 175

Chapter XI. FCoE Full Offload Initiator

Chelsio T5/T4 Unified Wire for Linux

Page 175

1. Introduction

Fibre Channel over Ethernet (FCoE) is a mapping of Fibre Channel over selected full duplex
IEEE 802.3 networks. The goal is to provide I/O consolidation over Ethernet, reducing network
complexity in the Datacenter.

Chelsio FCoE initiator maps Fibre Channel directly over Ethernet while being independent of the
Ethernet forwarding scheme. The FCoE protocol specification replaces the FC0 and FC1 layers
of the Fibre Channel stack with Ethernet. By retaining the native Fibre Channel constructs,
FCoE will integrate with existing Fibre Channel networks and management software.

1.1.

Hardware Requirements

1.1.1. Supported Adapters

The following are the currently shipping Chelsio Adapters that are compatible with FCoE full
offload Initiator driver:

  T520-BT
  T520-LL-CR
  T520-CR

1.2.

Software Requirements

1.2.1. Linux Requirements

Currently the FCoE full offload Initiator driver is available for the following versions:

  RHEL 7.2, 3.10.0-327.el7 *
  RHEL 7.1, 3.10.0-229.el7
  RHEL 6.7, 2.6.32-573.el6*
  RHEL 6.6, 2.6.32-504.el6*
  RHEL 6.5, 2.6.32-431.el6*
  SLES 12 SP1, 3.12.49-11-default *
  SLES 12, 3.12.28-4-default*
  SLES 11 SP4, 3.0.101-63-default *
  SLES 11 SP3, 3.0.76-0.11-default
  Ubuntu 14.04.3, 3.19.0-25-generic*
  Ubuntu 14.04.2, 3.16.0-30-generic *
  Kernel.org linux-4.1 *
  Kernel.org linux-3.18 *

Note

This product is not supported with the current release. Support will be added in
upcoming releases.

«
...
173
174
175
176
177
...
»

Содержание Chelsio T4
































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды