CHEFOOK EASY 700, Руководство по эксплуатации и обслуживанию

Страница: 45 / 52

45
LAVA STONE GRILL - EASY 700
Instructions for qualified fitters
UM300010
- 10/2019
© Copyright 2019
6
6-9 Adjustment for operation with different gases
Conversion to another type of gas must be carried out by authorized and qualified fitters.
For example, to switch from natural gases to liquid gases, the nozzles of pilot and main burners must
be replaced. The correct nozzles are indicated in par. Burner and nozzle specifications and adjustments
depending on the type of gas used on page 34 .
IMPORTANT
All the nozzles necessary for adjustment are supplied in a bag with the appliance; the main
burner injectors are marked in hundredths of mm, whereas the pilot ones are marked with their
reference number.
IMPORTANT
Each time the appliance is adjusted to operate with a different type of gas or at a different pressure
value, the indications of the new adjustment must replace the previous ones (apply the gas
setting plate).
6.9.1 Replacing the main burner nozzles
To carry out this operation proceed as follows:
- Turn off the gas supply tap;
- Access the burner;
-
Unscrew the nozzle (D) from its support and replace it with the nozzle suitable for the type of gas used
(see par. Burner and nozzle specifications and adjustments depending on the type of gas used on page
34 );
- Adjust the primary air operating on the adjustment bushing (C) (for primary air distance "H" see par.
Burner and nozzle specifications and adjustments depending on the type of gas used on page 34 );
- Refit all the parts removed so that the appliance can be used.
A. Main burner
B. Fixing screw for air adjustment
C. Air adjustment bushing
D.
Main burner nozzle
E. Gas ramp
F. Nut
B
C A D F E
Fig. 22 Nozzle main parts